It is not essential to change a caravan cell when it becomes damaged. It may be fixed to appear just like fresh and in a portion of the price of a new cell. The next guidance is fond of caravan flat panel repairs. However, caravan distinctive cell repairs may only be performed using specialist equipment. The initial phase of the caravan cell repair would be to make the damaged area. Take the time to mud in multiple directions. This can disclose low places and more large across the reduction. Usually the damaged area is larger than what it appears. Large places will present themselves as clean areas. Low areas will display the present paintwork.
Mix together some automotive product and hardener in the percentage of the basketball towards the measurement of the pea and sleek into and round the damaged area. Permit to dry for some minutes. During sanding the dark color shows any low areas. Do not sand one region for too much time as this simply removes product. This exercise can highlight any places which are low. Read products within the area until reduced places are cut back towards the degree of the remainder of the screen as is essential and repeat the procedure as numerous times. Keep using manual jackets with black aerosol paint to assist the sanding process. Ensure that the product feathers fully into whole regions all over the damaged area.
Work with a six-inch depth sander with 180 grit paper within the region to get rid of the 80 get scores. This sanded area is going to be as much as 2 larger all over the region to ensure all of the scores are removed. Repeat the procedure with 320 grit paper. This region is going to be another 2 larger throughout to get rid of all of the 180 scores. Ultimately go the region over again, plus one more 2 throughout, with red scotch to get rid of the 320 grit scratches. The caravan repairs have become ready for artwork and priming. Mask off the region across the repair. Spray on primer’s initial layer only within the affected region and permit to dry for some minutes. Spray the 2nd layer over the next layer over a somewhat larger area however, as well as a somewhat larger region.
Apply within the prepared area grit dry and wet paper. This can highlight any low spots. Feather the primer in to the existing paintwork in the sides of the repair. Do not leave any hard edges. If required repay the region to ensure all low and large places have already been evened out. Review the whole region that is to be decorated with gray scotch to get rid of any 400 scores and make the present paintwork for new color.